Published: September 09, 2020
Lava iris 512 (INT_001/S106) Flash File Dead & Hang Logo Fixed 1000% Tested File
Lava iris 512 S106 Official Flash File MT6572 Flash File Ok Tested File
Lava iris 512 Frimware S106 MT6572 Flash File, Lava iris 512 Frimware, Lava iris 512 Flash File Download .
lava-iris-512-int001s106-flash-file
Monkey Virus Problem,Pattern Lock Problem,Privacy Lock Problem Solution,
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
It is Official firmware 100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank,.
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
It is Official firmware 100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank,.
Lava iris 512 INT_001/S106 Flash File
MODEL:Lava iris 512 CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x00E9000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Waiting for USB Port...
Set MediaTek DA USB VCOM (Android) (COM39)
Reading preloader...
Reading mbr...
Reading ebr1...
Reading uboot...
Reading bootimg...
Reading recovery...
Reading sec_ro...
Reading logo...
Reading android...
Reading cache...
Reading usrdata...
Saving as scatter file...
>>Done!
Downloading Boot8 ...
EMMC Size: 0x00E9000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Waiting for USB Port...
Set MediaTek DA USB VCOM (Android) (COM39)
Reading preloader...
Reading mbr...
Reading ebr1...
Reading uboot...
Reading bootimg...
Reading recovery...
Reading sec_ro...
Reading logo...
Reading android...
Reading cache...
Reading usrdata...
Saving as scatter file...
>>Done!
Install ROM:
Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
SPD Install ROM:
_______________________
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
