Published: September 09, 2020
Lava iris 505 (H001_GP/S105) Flash File Dead & Hang Logo Fixed
LAVA iris 505 Flash File Ver.H001_GP-S105 MTK6572-blue lcd problem solved
LAVA iris 505 Flash File MTK6572-blue lcd problem solved
LAVA iris 505 Flash File Ver.H001_GP-S105 MTK6572
LAVA iris 505 S105 Flash File, LAVA iris 505 Firmware
lava-iris-505-h001-gp-s105-flash-file
LAVA iris 505 Ver.H001_GP-S105 MTK6572
Monkey Virus Problem,Pattern Lock Problem,Privacy Lock Problem Solution,
Privacy Protection,Data Auto Open,
Auto Application download, frp Lock
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Lava Iris 505 Invalid IMEI & Unknown Baseband repair solution
Lava Iris 505 Official Firmware 100% Tested Flash File Update link
Lava Iris 505 Flash file Download link
It is Official firmware 100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank,.
LAVA iris 505 Ver.H001_GP-S105
Install ROM:
Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
SPD Install ROM:
_______________________
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
