Published: September 03, 2020
Lava iris Atom2 (INT_S106) Flash File Dead & Hang Logo Fixed
Lava_iris_Atom2_INT_S106 Firmware Ok Tested File
Lava iris Atom2 Flash File_Atom2_INT_S106 Firmware 100% Ok Tested File
Lava iris Atom2 Flash File 4.4.2_Atom2_INT_S106 Firmware,
Lava iris Atom2 Flash File, Lava iris Atom2 Firmware
lava-iris-atom2-ints106-flash-file-dead-fixed
Monkey Virus Problem,Pattern Lock Problem,Privacy Lock Problem Solution,
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Lava iris Atom2 Official Firmware 100% Tested Flash File
Lava iris Atom2 Flash file
Lava iris Atom2 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
Lava iris Atom2 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
Lava_iris_Atom2_Atom2_INT_S106
Version: S106/H001BRAND:LAVA
MODEL:IRIS ATOM 2
ANDROID VERSION:5.1 LOLIPOP
FILE VERSION: Lava_iris_atom_2_s206L_20151106
FILE TYPE: PAC
Install ROM:
Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
SPD Install ROM:
_______________________
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
