Published: September 09, 2020
Lava iris 750 (INT_S109) Flash File Dead & Hang Logo Fixed
Lava iris 750 Flash File _MT6735_INT_S109 Firmware 100% Ok Tested
Lava iris 750 Flash File, Lava iris 750 Firmware flash file Download.
lava-iris-750-ints109-flash-file-dead-fixed file
Lava iris 750 Official Firmware 100% Tested Flash File
Lava iris 750 Flash file
Lava iris 750 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
Lava iris 750 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
Lava iris 750_INT_S109
Install ROM:
Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
SPD Install ROM:
_______________________
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish