Published: August 18, 2020
SMILE GLORY 02 [ EX ] Flash File Firmware MTK6572 4.4.2 _1000% Ok Tested
Smile Glory 02 (EX) Flash File Dead & Lcd Fix
smile-glory-02-ex-flash-file-dead-lcd
SMILE GLORY 02 Flash File
GLORY 02 Firmware
SMILE GLORY 02 Firmware
GLORY 02 Flash File
SMILE GLORY 02_EX_C5 20160322.131512
Monkey Virus Problem,Pattern Lock Problem,Privacy Lock Problem Solution,
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
SMILE GLORY 02 Official Firmware 100% Tested Flash File
SMILE GLORY 02 Flash file
SMILE GLORY 02 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
SMILE GLORY 02 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
SMILE GLORY 02_EX_C5 20160322.131512
Install ROM:
Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
